The Track ‘n Grab is the latest in drilling innovation that puts safety and efficiency first.
This completely independent bi-energy service vehicle was designed to make drilling easier and safer. It’s equipped with the remote controlled ManipAll 250 RC that offers a lifting capacity of 200 kg or 440 LBS. The vehicle comes with a removable tooling rack for easy pick-up and drop off of tooling at the jobsite, with up to 4000 kg or 8819 lbs of loading.
The ManipAll can lift tooling the drill rods up by magnet, once lifted off the rack, a hydraulic gripper locks closed to hold the rod.
The Track ‘n Grab is mounted on a rubber-tracked undercarriage and equipped with two outriggers for added stability. And with its self-stabilising capabilities, you can be sure that your tooling doesn’t fall out during transport.
This vehicle makes getting your equipment to your job site effortless. Not only can it handle your casings, rods and core barrels, but can also be used to transport water tanks, grout mixers or other drilling auxiliaries. All powered by battery, with the availability to switch to diesel if power is depleted.
The Track ‘n Grab can be fully remote controlled in three modes:
| Track 'n Grab | |
|---|---|
| Diesel engine | 25 Hp |
| Electric engine | 48V/3kW, with 8x180Ah-48V battery pack and 2x20Ah-110/220V charger |
| Maximum speed | 1.7 km/h |
| Maximum payload | 3,250 kg / 7150 LBS |
| Colours | Eijkelkamp Silver (RAL 9006) and Eijkelkamp Orange (RAL 2003) |
| Tooling diameter | Minimum: 75 mm / 3 in | Maximum: 273 mm / 10¾ in |
| Tooling length | Minimum: 1.5 m / 59 ft | Maximum: 3 m / 10 ft |
| Automatic levelling | Longitudinal front 20° and rear 15° | Lateral left/right 15° |
| Remote control modes | Manual, Linear, Memory |
| ManipAll | 250 RC |
| Filename |
|---|
| Brochure - Track'n Grab |
