With this water level meter you can take measurements to a depth of 10 metres. The pocket water level meter has acoustic and light signals when the probe comes into contact with a conductive liquid.
The water level meter is part of the standard equipment for measuring the groundwater level. It has a stainless steel probe connected to a 10-metre tape with centimetre graduations. The probe is easy to clean. In addition, it is a compact device and therefore easy to take along. In short, the perfect device for quick, simple and solid measurements of the water level.
The water level sensor is easy to use; when the probe comes into contact with a conductive liquid, it will emit a clear sound and light signal. If the cable is then lifted slightly, the signal stops and the depth can be read directly from the measuring tape (accuracy: ± 1 centimetre).
Applications
| Water level meter pocket size - 10 m | |
|---|---|
| Diameter (D) and /or size (L*W*H) | Sensor D 12 mm, L 70 mm |
| Maximum measuring depth | 10 m |
| Measured parameters | Level |
| Measuring principles | Conductivity |
| Battery | 9 volt DC with, Lifetime 2 years |
| Product material | Stainless steel and electroplated brass (easy to clean) |
| Safety class for probe | IP 68, permanently pressure resistant |
| Safety class measuring tape | IP 64, spray water resistant |
| Reading accuracy | 1 cm |
| Registration type | Manual |
| Recommended storage temperature | +5 °C up to +30 °C, for battery protection |
| Package size | 11 x 11 x 11 cm |
| Weight | 420 g |
Need advice choosing the right product for your application? Our specialist Sandra is happy to help.
