The SP 35 is the lightest stand-alone CPT push frame in the Eijkelkamp CPT pusher range, and suitable for mini CPT cones. The unit can be mounted on a CPT carrier, or directly mounted to almost any surface through the use of the available frames. The unit is powered through a supplied, lightweight hydraulic power pack.
The range of stand-alone CPT pushers are designed to offer the highest degree of flexibility and allow you to perform CPT on even the most logistically challenging projects.
The SP 35 is the lightest and most transportable pusher in our range, being easily hand portable as well as simple to operate. SP 35 stands for Stand-alone Pusher with a force of 35 kN. The SP 35 is suitable for 2 or 5 cm2 cones and is perfect for use in enclosed areas, thanks to the included electric powerpack.
When only very small pushing forces are required, for near surface investigations or in soft soils, or when using smaller diameter cones, 35 kN may be more than adequate. In those cases the Stand-alone Pusher is ideal. This pusher is provided with ball clamps, which greatly simplifies the pushing and pulling of the CPT tubes.
| SP 35 | |
|---|---|
| Pushing Force | 35 kN | 3.5 tf (long) |
| Conus type | 2 cm2 | 5 cm2 |
| Diameter CPT rods | 16 mm | 25,2 mm |
| CPT stroke | 600 mm | 23,6 in |
| CPT down speed | 1.5 - 4.3 cm/s |
| Maximum up speed | 9.3 cm/s |
| Weight (max.) | 45 kg | 100 lbs |
| Transport dimensions (LxWxH) | 900 x 380 x 275 mm |
| Powerpack Electric | 230V 50Hz, 16A |
| Hydraulic connection | Min. 130bar @ 3 l/min |
Need advice choosing the right product for your application? Our specialist Sven is happy to help.
