Submersible pump set used for the purging and sampling of monitoring wells to a depth of 295.2 feet (90 meter) and an inside diameter of 1.9 inch (50 millimeter) and up. The MP 1 is compact and easy to install and is supplied on a reel.
The Redi-Flo2 (MP 1) submersible pump is specially designed for purging and sampling of monitoring wells. Originally designed by Grundfos, Royal Eijkelkamp is now exclusive manufacturer of this unique groundwater pump.
It’s the only pump in the world which can lift water up to 90 m above water level within a well with a diameter as small as 50 mm (2 inch)!
This pump can be delivered with a re-usable PTFE tube, a low-cost LDPE tube, or no tube.
The high capacity of this pump allows for quick purging of the measuring point. By setting a low pumping capacity the same pump can be used for sampling. The pump housing is completely made of stainless steel, which helps prevent contamination of the sample.
The pump motor is controlled by an adjustable frequency converter. Thanks to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 528.34 US gallons of water (2m3 )/hour. This results in a steady flow of anaerobe water.
Every measurement point must be purged before samples can be taken. The large capacity of the MP 1 pump ensures that the measuring point is quickly purged. By setting it at a lower pumping capacity, the MP 1 can also be used for sampling.
Built-in safeguards protect the Redi-Flo2 and the converter against overload. The actual frequency can be read from a display.
Maintenance
Regular servicing ensures optimal functionality and safeguards against contamination with its stainless steel housing. Maximize the reliability and longevity of your MP 1 / Redi-Flo2 submersible groundwater pump with proper servicing and maintenance.
Watch our instruction video for maintaining your MP 1 and Redi-Flo2 pump.
Applications
Available variants
Set contains
The set is delivered fully assembled:
| Redi-Flo2 (MP 1) submersible pump | |
|---|---|
| Power input | 1.3kW |
| Voltage | 3 x 220 V 400 Hz |
| Maximum current | 5.5 A |
| Motor protection | Built-in thermal switch |
| Water temperature | 0 °C to +35 °C |
| Discharge port | Rp 3/4 |
| Continuous operation | 500 hours |
| Package size | 120 x 80 x 100 cm | 47.2 x 31.4 x 39.3 inch |
