What are you searching for?
My quote
CTD Diver water level logger
CTD Diver water level logger
Diver water level loggers family
Do you want to allow cookies?

Please accept cookies to view this content

Edit cookie settings
CTD Diver water level logger
CTD Diver water level logger
Diver water level loggers family
Do you want to allow cookies?

Please accept cookies to view this content

Edit cookie settings

CTD-Diver

11.11.60

Corrosion-proof multiparameter groundwater data logger, suitable for long-term monitoring of saline environments. Available in various measuring ranges: 33', 164', 330' and 660' (10m, 50m, 100m, and 200m).

  • 144,000 records to monitor water level, conductivity and temperature
  • Innovative, corrosion-proof, ceramic housing technology
  • Easy to install, fits in most wells
  • Cost-efficient solution for long-term and frequent measuring
  • Reliable and accurate data
  • 30-point pressure factory calibration

Description

Where there is a need to monitor groundwater levels and salt water intrusion, injected wastewater, or contamination from chemical discharges and landfill sites, the CTD-Diver with its 22 mm diameter rugged corrosion-proof ceramic (zirconium-oxide) housing is the instrument of choice.

The CTD-Diver is a submersible datalogger for long-term, uninterrupted, real-time water level monitoring using a pressure sensor when submerged at a fixed level under the water surface. The pressure sensor measures the equivalent hydrostatic pressure of the water above the sensor diaphragm to calculate the total water depth. The ceramic casing is suitable for brackish or saltwater applications as well as aggressive environments. 

Connect the diver to a modem to transmit collected data directly from the field to your data centre.

Features

The CTD-Diver is an ideal choice for ground and surface water level applications. The water logger is equipped with a four-electrode conductivity sensor that measures electrical conductivity from 0 to 120 mS/cm. This type of measuring cell is relatively insensitive to sensor fouling, thus keeping maintenance to a minimum. 

  • Compact size: diameter of 22mm and length of 135mm
  • Memory: 144,000 records of time stamp, pressure, temperature and conductivity (and 144,000 back-up)
  • 30-Point Pressure Factory Calibration
  • Corrosion-proof ceramic pressure sensor
  • Various methods for measurement
  • Event based, averaging and pumping tests sample method to conserve memory

Special software is available for the Divers. Download via WeTransfer

Measuring conductivity

A change in conductivity may be caused by for example changes in water flow, or increasing/decreasing pollution or salinization. The CTD-Diver measures the conductivity of a solution and can be programmed by the user to measure either the true conductivity or the specific conductivity at 25°C.

Available variations

  • 11.11.60.01 Range 33' (10 meters)
  • 11.11.60.02 Range 164' (50 meters)
  • 11.11.60.03 Range 330' (100 meters)
  • 11.11.60.04 Range 660' (200 meters)

Applications

  • Water quality monitoring for agriculture, remediation, correlate conductivity with salt, TDS, permanganate, nitrate, sulphate
  • Tidal fluctuations monitoring
  • Estuary and wetlands monitoring
  • Leachate monitoring at landfill sites
  • Aquifer storage and recovery
  • Network automation monitoring 
  • Groundwater/surface water monitoring projects 

Specifications

CTD-Diver
Length 5.31 in (135 mm) including suspension eye
Material casing Zirconia (ZrO2)
Protection class IP68: 10 years continuously submerged in water at 100m
Memory capacity 144,000 measurements
Sampling rate 1 sec to 99 hours
Battery life 8-10 years, depending on use
Conductivity range Up to 120 mS/cm
Diameter 0.86 in | 22 mm
Weight 3.35 oz | 95 g