Floor covers can be used to seal boreholes in concrete, up to a diameter of 4.7-4.8 inch.
This floor cover can create a liquid tight seal of the floor thanks to a chemically resistant rubber, that seals the drilled floor at its coating.
Once installed the cover lid causes minimal disturbance for a passing vehicle. The liquid tight floor cover is applied at gasstations, factories, garages, carwashes, chemical plants, etc.
Available variations
Two types of floor covers are available: a light and a heavy model.
The light model has a 0.12" thick electrolytical galvanized lid. It has a load taking capacity of 2205 lb according to NEN/EN 124. This cover is mostly applied indoors, to seal holes in light loaded liquid tight floors.
10.02.60 Floor cover light, galvanized, 1 piece
10.02.65 Floor cover light, galvanized, 50 pieces
The heavy model has a 0.16" thick stainless steel lid. This cover has a load taking capacity of 3858 lb according to NEN/EN 124 and is normally used outside, to seal holes in normal to heavy loaded liquid tight floors.
10.02.62 Floor cover heavy, stainless steel, 1 piece
10.02.67 Floor cover heavy, stainless steel, 50 pieces
For both covers, a yearly inspection is recommended.
| Filename |
|---|
| Manual 10.02.60 Floor Covers |
